Most Recent

LED License Plate Lights, the new fashion trend for automotive industy

LED License Plate Lights, the new fashion trend for automotive industy || Ever since 2006, when Lexus first introduced the LED license plate lights for its popular Lexus IS250 and IS350, this new "fashion trend" has been getting hotter and hotter.

There are two advantages for the LED license plate lights.

First of all, it gives nice white color which gives a nice match with most cars' HID headlights.

Secondly, the White LED license plate light emits a 5000K – 5500K color which is close to the sun light makes the license number easy to read.

After Lexus introduced the LED license plate lights for its whole production lines, BMW has followed up this new trend for its most popular 3 series with white LED license plate lights. In 2010, Mercedes has also adapted this LED license plate lights for its flagship, the S Class.

For cars without the factory equipped LED license plate lights, the aftermarket LED replacement bulbs become the solution.

For more American and Japanese cars, the bulb for the license plate light is 168 or 194 or 2825 wedge shape light bulb. The most common one and the betting fitting ones are the 12-SMD 360 Degrees Shining T10 LED bulbs.

There are 12-pcs super bright SMD SMT LED chips on each light bulb that shine 360 degrees to project light on the license plate nicely.

For more European cars, the bulb for the license plate light is 6418 or 6411 festoon shape light bulb. Since for most European cars, there are on board computer (OBC), therefore in order to change the license plate lights to LED and at the same time, eliminate the error warning showing on dashboard, you will need the Error Free 6418 LED bulbs.

For these Error Free LED bulbs, there are can-bus controllers built-in, therefore they will bypass the on board computer to avoid the warning message about the "bulbs out" displaying on dashboard.


Source : Articlesbase.com


made Friday, December 25, 2015
Russia's "red car" Volga Automotive History

Russia's "red car" Volga Automotive History || Speaking after the Volga automobile 60-80 people will believe a slight impression of the founding leaders are riding models Bacheng brand, and by the 1990s, with Volkswagen, Nissan, Toyota and other models introduced, the brand was gradually fade out of our field of vision, with a Volga car at the time is definitely a symbol of identity and status, while the Volga automobile industry is a symbol of the former Soviet Union and pride. Today we have and we come into this brand, take a look at the history of the Volga car.

Before talking about the history of the Volga car, let's talk about the history of Gorky automobile plant, when the Volga automobile plant by Gorky automobile models, Gorky automobile plant in accordance with the Chinese pronunciation of its Russian acronym GAZ referred to as "GAZ factory". The models produced by the plant, also known as GAZ car.

Gorky Automobile Factory was established in 1930, 1932, introduced the first GAZ AA-type trucks, hanging in the official license GAZ 21 Volga Volga before the introduction of Gorky automobile plant has been in mass production of various models of GAZ vehicles , and models including trucks, small buses, cars, jeeps, and even armored vehicles, and the first car GAZ Volga GAZ 21 was formerly known as M20 Pobeda (Pobeda is the meaning of victory), from 1946 to 1958 production, then power on board is a 2.1L inline four-cylinder engine, maximum power of 52 hp (39 kW).

October 10, 1956, the first a Volga car brand the former Soviet Union successfully Gorky automobile plant assembly, called the V Jai GAZ 21. The first 21 cars off the assembly line at Ford GAZ assistance to complete only three. Once launched on the popular police and taxi drivers of all ages, but also won the Soviet government agencies of all ages.

The car was designed by the Lev Yeremeev, the appearance of the main design elements on the vehicle by the impact of the U.S., while the interior part is based on Ford's change from O-Matic, power, produced in 1956, equipped with 21 volt Jai GAZ of its predecessor GAZ-M20 Pobeda improvement from the 2.1L inline four-cylinder engine, 65 hp maximum power, and to the years 1957 -1958, V Jai GAZ 21 facelift model ZMZ-21A four-cylinder engine of 2.445L , the maximum power of 70 hp, the gearbox from the United States to use Ford's 3-speed manual transmission.

October 1958 GAZ 21 volt Jai had a facelift, new car the most obvious change is the original grille was replaced with 16 banners vertical grille, in addition, its wheels and taillights, also after simple changes. By 1962, the new car has been improved again, the changes include the exterior, interior and technical upgrades, but most noteworthy is designed based on GAZ 21 GAZ 22 and travel version specifically for the KGB agencies (National Security Council, the former Soviet Union, former Soviet intelligence and counterintelligence agencies) custom 5.53-liter V8 GAZ 23 also began production in 1962 (with the regular edition models there is no difference in appearance, but the appearance of color provide only black).

By 1960, although the GAZ 21 is still quite popular, but the design has gradually become out of date. Thus Gorky automobile plant also started the next generation of product development. In 1967, the new Volga GAZ 24 (GAZ-24) began limited production, first produced a total of 24, and by 1970, after large-scale production.

GAZ 24's development can be basically divided into three generations, the first generation model was produced in 1970-1977; the second generation of models produced in 1977-1985; third-generation model in 1982 - 1992 production. The first-generation models replaced the main leaf spring, new ignition, remove the hood on the rear-view mirror, etc.; and second-generation model is switched to a new bumper, retractable seat belts, front fog lamps and a new dashboard, front seats also have adjustable seats into a separate form.

The most worth mentioning is the third generation of the GAZ 24, compared to the previous two generations of models that change to be more obvious, the first power by the previous ZMZ-24 engine (85 horsepower) escalated into ZMZ-402 engine, engine displacement is consistent with the old 2.445L, but the new engine's carburetor and the introduction of a new cooling system, making the new engine's power to achieve a 98 horsepower, also in appearance, with a new grille, not the front door of the triangular window, larger wheels and new door handles, and the interior dashboard and seat head restraints, also a new design.

Of course there are many derivative version of the GAZ 24 models, including built specifically for GAZ 24-01 taxi, travel version of the GAZ 24-12, GAZ 24 convertible car, truck, 4WD version of the jeep and specialized built for the KGB's GAZ 24-24 5.53L V8 models, etc., which built specifically for the KGB GAZ 24-24 models, it uses a lot of time advanced equipment, including a 3-speed automatic transmission , power steering, improved chassis and suspension, etc.

At the same time in 1982 GAZ GAZ 24 3102 as the third generation of an upgraded version of a small car production in Russia. Its appearance is given a new front face, while the internal switched to a new instrument panel and three steering wheel. Dynamic, equipped with a ZMZ-4022 inline four-cylinder engine, maximum power of 105 hp (78 kW), this model was produced until 2010, including a mid-1997 after upgrade, changes include a new 5-speed manual gearbox, the installation of power steering system, four-wheel disc brakes, 15-inch wheels and so on, power is also upgraded from the previous 105 horsepower to 130 horsepower, of course, specially built for the police and the KGB's GAZ 3012 5.53L V8 models also have the production, this model was produced until 1996.

GAZ 24 production has been stopped in 1992, in the export market has achieved considerable success, it is the Gorky automobile plant sale on the history of a vehicle up to a total of 600,000 units. Most common in the Volga is GAZ 24 model. Even after the reform and opening up, we are able to see this classic face. Official car at the time the field of high-end, in addition to a large red flag, outside the old Shanghai, the most widely used GAZ 24 car, only the bureau-level cadres in order to enjoy the treatment. And into the late 1980s, its status gradually Santana, crown, Gongjue Wang, etc. replaced.

By 1992, with the Soviet Union, Russia's auto industry has become bleak, in the 1990s, the Volga has also launched several models, but not their long life cycle, including the launch of the GAZ 1992 31029,1994 launched in 3110 and launched in 1996 GAZ 3110, and by 2000 the annual production of only the Volga 56000.

GAZ 24 in 1992, discontinued after the GAZ 31 029 officially listed, which draws on models designed GAZ 24 and GAZ 3102 two models, this model be integrated products, and this model on the body design more aerodynamic design, while the tail remained a GAZ 24 design, dynamic, GAZ GAZ 3102 consistent with 31029, but the V8 is no longer launch 5.53L car. GAZ 31029 officially discontinued in 1997.

GAZ 3110 (GAZ-3110) is the GAZ 24 modernized version of another, put into operation in 1997, a new car in appearance on a new design, more modern feel, but also in body paint instead of propylene acid paint, had substantially reduced the Volga car body rust problems. Also worth mentioning are the GAZ 3110 also introduced in the power ZMZ-560 and ZMZ-561 two 2.1L turbocharged diesel engine, which ZMZ-560 engine's maximum power is 70 kW (95 hp), ZMZ -561 engine maximum power of 80 kW (109 hp). The car stopped production in 2003. The 3110 station wagon version of the GAZ 310221-2005 was discontinued. Sedan version in 2003, before the cut-off headlights also had a style change, but still maintained a station wagon version of the 1997 style headlights.

In addition to the GAZ 24 based on the derived models, Gorky automobile plant also introduced 90 other two new models, including the 1994 to 1997 production of GAZ 3105 trial, which uses a four-wheel drive , OHC V8 engine, but only after the production of hundreds of department discontinued. After 3105, the replacement of its rear-wheel drive products in 1998 GAZ 3111 to 2003 for the production. Russia to enter the car outside the Western consumer market. As production costs are too high, its starting to make $ 8,800 no competitive advantage, and soon after quit the production.

To the joint venture vehicle in order to face the 21st century and gradually occupied the situation in the Russian luxury car market, GAZ car is still a final effort, the introduction of a more active modern Volga cars, GAZ 31105 2004 GAZ 3110 as an alternative to car type of introduction, not only transmission and suspension upgrades, and in 2006 the old ZMZ-4021 and 4062.10 Chrysler engine was also replaced by the 2.4L DOHC engine, its maximum power of 123 horsepower.

The end of 2005 Russia's Gorky automobile plant main owner Deripaska (Russia's largest aluminum giant) announced Gorky automobile plant will be phased out production of "Volga" brand cars, by 2007 all over. The majority of the Russian "Volga" brand car owner's request, the cut-off, the Gorky automobile plant will continue to produce the car parts for a period of 10 to 15 years. In fact, back in 2000, Deripaska acquired Gorky automobile plant, the plant's small car line began regular holiday. At that time, the market has been unable to digest the "Volga" car brand of all production capability.

But by 2006 GAZ depot overturned the previous decision, announced further investment in production of Volga cars, and continue to produce at the production launch in 1982, GAZ 3102,1997 GAZ 310,221 and was launched in 2004, launched GAZ 31105 , and Chrysler also reached an agreement, the introduction of the Dodge Stratus and Braun's production equipment and intellectual property rights, domestic production in Russia, and on this basis to allow for new car development.

In 2008, Gorky invest $ 200 million the company prepares to launch new car Volga Siber, plans to produce 100,000 vehicles, the largest production capacity can reach 16 million vehicles, the company would have 5-6 years to prepare, each year 45,000, but a financial crisis hit completely disrupted Golgi depot plan.

September 2008 Siber listed in the design of new cars, and Chrysler Sebring quite similar, because the car's technical support is from Chrysler. Power has also adopted the Chrysler 2.0L and 2.4L engine, power was 141 hp and 143 hp, 188 Nm of torque, and 210nm Nm, matching the engine and 5 speed manual 4-speed automatic transmission.

After the September-November launch of the new car dealer sent a total of 1,000 vehicles, of which 35% by the state institutions, banks, customs orders, sales are very bleak, almost became a victim of the financial crisis, and to the Volga Siber launched in December a substantial discount from the original $ 20,000, benefits to 1.6 million dollars, which brought a certain amount of increase in sales. In the old Volga, the Volga in the sale of three cars in the first 11 months of 08 produced a 19 956-type cars, but car sales accounted for most of the year the share of the Volga.

To the first quarter of 2010, sales of Volga Siber cars only 200 or so, but because of lack of complementary products some time ago, Volga Siber production line had to stop. In addition, the first half of 2010, total production of Volga cars brand also only 2500 or so.

At the same time in 2008, Renault had to buy $ 1 billion 25% stake in the Volga, to 2011, the Renault-Nissan Alliance to discuss again with the Gorky automobile plant, Renault wish to acquire 10% stake in the Volga car, The Nissan will soon decide whether to buy the same price Volga 25% of the shares. In addition, in July 2011 Gorky automobile company also said that starting in 2012 Gorky automobile plant will start assembling the major brands of car production joint venture, when the Volga brand of cars will stop, but that does not mean that domestic "Volga" brand to disappear.


Source : Articlesbase.com


made
Manual Transmission/hydraulic Clutch Fluid: Monthly Automotive Maintenance

Manual Transmission/hydraulic Clutch Fluid: Monthly Automotive Maintenance || The latest edition of our monthly maintenance "how to" series, is going to teach us how to check the hydraulic fluid in a vehicle with a stick shift, or in other words, a manual transmission. Cars that have a manual transmission use either a cable, which connects the transmission and the clutch, or a hydraulic system, for which you need a fluid to help keep it running efficiently, and smoothly. 

For the purpose of this article, we will assume that you have determined that your vehicle is equipped with a hydraulic clutch system. You can easily find out which type of automatic transmission that you have in your car, by reading your owner/operator manual, or by researching your vehicle make and model online. A browser search using the name and year of your car will return results pertaining to any question about your type of car that you want to ask.

The steps listed below will guide you through the process.

Hydraulic clutch fluid in a manual transmission.

There really is no actual "clutch fluid", so what you are going to use will be stated in your manual. Likely, it will be either some type of automatic transmission fluid, or perhaps even a brake fluid, or motor oil, which is also designed for use in manual transmissions.
  1. Park the car on level ground, turn off the engine, and allow it to cool down.
  2. If the clutch pedal went directly into the engine compartment, this is where you would find the clutch master cylinder and clutch reservoir. At the back of the engine.
  3. You should be able to see a plastic container; it is only about an inch big. It looks similar to the brake fluid reservoir, only quite a bit smaller.
  4. The hydraulic fluid reservoir is usually made of clear plastic, so you should be able to check the fluid level without even having to open it up.
  5. If the fluid level does not reach the top of the reservoir, then you should add hydraulic fluid. 
  6. If your clutch pedal is not working properly even after you add fluid, or the fluid level continues to drop, then there is probably a leak somewhere in the hydraulic line, or in the reservoir itself, or at the connection between the pedal and the hydraulic line. 

In some vehicles, there is actually no place in the engine compartment where you can easily check the hydraulic fluid level. The only way a check can be accomplished is from underneath the car. If you're not comfortable yet with your newly learned acquired maintenance skills, and your vehicle is not exhibiting any shifting symptoms, don't worry. Just have the hydraulic fluid level checked at your next oil change. 
However, if you want to give it a try, here are the steps to do it.
  1. Get under the vehicle, and locate the fill plug, it should be underneath where the clutch pedal is. 
  2. Remove the plug and stick your finger in, (it won't leak out on you because the reservoir is tilted), if you cannot feel any fluid with your fingertip, add some. 

Do not try to check your hydraulic fluid level, without consulting your manual first.


Source : Articlesbase.com


made
Global and China Automotive Air Conditioner Industry Report, 2009-2010

Global and China Automotive Air Conditioner Industry Report, 2009-2010 || Japan is an overlord in household air-conditioner field worldwide thanks to its most advanced technology in the core upstream component--compressor. Many Japanese enterprises, including Daikin, Hitachi, Panasonic, Toshiba, Mitsubishi Heavy Industries and Mitsubishi Electric, are the key players in compressor industry. As such, American enterprises still have competitive strength in high-power air-conditioning compressor industry, represented by Carrier, Trane, Copeland and York. Accordingly, the automotive air-conditioner field is dominated by Japanese enterprises and American counterparts. 

Denso continues its leading role in the sector. Together with Toyota Industries, which is the largest manufacturer of automotive air-conditioning compressor in the world, the collective market share of the two surpasses one third of the total. Automotive air-conditioner or compressor products of Denso have been used by the world's well-known automakers. At the early stage, Denso built massive business in compressor sector. After 2000, Denso began to transfer compressor business to Toyota Industries and focus on the design and sales of the whole system of air-conditioners. Besides, Denso cooperated with Toyota Industries to establish compressor base in overseas country. And Toyota Industries holds always as high as 65% shares of the project. Toyota Industries only produces compressor.

The auto air-conditioner technology of Valeo stems from ZEXEL which originated from DKK. As the biggest producer of diesel fuel injection in Asia, DKK was founded in 1939 with its technology from Bosch. In 2000, ZEXEL was purchased by Bosch, and Bosch only retained diesel injection business and it sold in 2005 its compressor business to Valeo with €100 million. Since then, the joint venture had become the wholly-owned subsidiary of Valeo. Although the compressor business is not its core operation, ZEXEL still boasts the exceedingly excellent compressor technology.

About 70% revenue of Calsonic Kansei, a membership of Nissan Group, comes from Nissan which holds 32% shares of the company. Calsonic Kansei originally cooperated with Harrison (affiliated to Delphi Corporation) to produce auto air-conditioning compressor, and later acquired compressor business of NSK, which has gained favor from BMW due to its state-of-the-art technology. In particular, BMW contributes more than 70% to revenue of NSK from compressor business. Yet, NSK rests its core business with timing equipments. It is beyond doubt that Calsonic Kansei becomes the supplier of BMW after the acquisition.   

Keihin, a carburetor giant, has also made remarkable achievements in compressor sector. In spite of not being compared with the three leading manufacturers aforementioned, Keihin has developed exceedingly loyal clients after years' cooperation with Toyota. Additionally, there has JCS, an up-rising star co-funded by Mazda, Visteon and Panasonic. JCS is expected to witness a bright prospect since it has reliable customers like Mazda and Ford.

Although it is in hardship, Delphi Corp. never tends to quit its core business – automotive thermal system. As the former world's largest manufacturer of auto air-conditioning compressor, Delphi Corp. has long teamed up with Harrison to produce compressors. As an enterprise with 100-year history, Harrison has won a host of faithful customers including Fiat, PSA and Renault apart from its VIP client--GM.

Visteon shares a slice of pie in auto air conditioner field by its role as a share holder of Halla Climate Control Corp. Similar to Delphi Corp, Visteon also concentrates on its automotive thermal system business and has no intention to quit auto air conditioner business. Moreover, Visteon has obtained over 60% auto air conditioner business from Hyundai by relying on Halla Group.

Being short of technology support, Behr, a German enterprise, joins hands with the second largest air-conditioning compressor manufacturer in Japan - Sanden to offset its demerit. In general, the air-conditioner system of Behr employs the compressor produced by Sanden. In recent two years, Behr has been to the bad ceaselessly while the profit of Sanden dropped not so much. 

Chinese manufacturers are professional in after-sale maintenance market, which makes China be the largest maintenance base of automotive air-conditioning compressors around the globe. Chinese manufacturers feature high output, low unit price and slim profit; while the German enterprises are powerful in coach air-conditioner compressor, represented by BITZER which almost monopolizes the market.  


HEV (Hybrid Electrical Vehicle) air conditioner is likely to be the development tendency of automotive air-conditioner business. The main difference between HEV and traditional automobile lies in driving energy, which requires the driving mode of air-conditioning compressors to be modified. Currently, the leading enterprises in HEV air-conditioner compressors are Sanden and Toyota Industries.


Source : Articlesbase.com


made
Automotive Consulting firm: 5 Most Important Steps

Automotive Consulting firm: 5 Most Important Steps || An automotive industry is basically a unit that deals in the manufacturing of automobiles. All the work like designing automobiles, manufacturing it, marketing it etc. are undertaken by this industry. If you are starting up with a new industry then you may require a number of different resources which can help you understand the market entry strategy or know other aspects. This is where automotive consultants can help you. They can help you get reports and information which can help you improve your business as well. 

How automotive Consulting help us in automotive Market
Managing an automotive industry without any external help is not easy as there are many things which influence it. Therefore in order to recognize these things, you can hire automotive consultants who can provide you with automotive market research and can come up with customized solution for all your problems. They can provide you with market entry strategy which can help you get the required information about the industry. 

Here are the 5 most important steps by which the consultants can help you with your industry-

The automotive consulting provide you with -
1. Market analysis- for an efficient automobile industry, it is important that you have a good market analysis. It is not possible for you to do so by yourself as it is time taking and requires in depth research. The consultants have good automotive market research with them and you can simply contact them to get the same.

2. Customer analysis may also be required by you as it helps you to recognize your target clients and focus your production on them.

3. Once you have delivered your results to your costumer, you also need to get reports on customer satisfaction so that you may be able to judge your own work. Here again the consultants can help you know about the same and can get you the result.

4. The automotive consultants can also help you plan your growth strategy which can help you improve your industry. They can help you introduce changes which can earn you good profit and can also help you stay competitive.

5. When providing you with the solutions related to the automotive industry, the consultants also deal with the risk assessment which allows you to understand the industry well and work according to it.


Source : Articlesbase.com


made
The Best Possible Check for Used Cars

The Best Possible Check for Used Cars || Getting a new car is an exciting time, as through the help of it the owner can avoid the hassle encountered when travelling from a place to another with the accessibility of public transport. As for a middle class person buying an expensive car is a dream which requires a lot of funds and resources in order to be achieved that might not be possible for them. A used car serves as a viable option aiding them to have all the amenities as required by them for themselves and for their family. Offered at a better price the used cars are convenient to buy and use without any sort of trouble.

As you might picture a used car having the bright clunky colour standing in the auto shop with the rims having a bit of rust, there might be many lemons out there having the vehicles. The vehicles must be certified as the perspective from the buyer as the seller has a large shop and contains the quality ones in stock. Thebuying of a used car is a bit tricky and requires you uttermost attention, as one slip will cost you a lot. There are many flaws in used car and a major one is the money owning of the vehicle owner from a financier.

You must ensure that any sort of payment is not left out by the owner to be paid as there are many chances that you could end up failing in getting the car to be there in your garage. With the help REVS check (previously known as PPSR Check) you can ensure the report regarding the past of the prospective vehicle. The Australia wide REVS check you can see if there is any sort of amount that owner has pay on the selected particular vehicle you are willing to buy.

Due to non-obligation of the payments the vehicle can be repossessed from you leaving in midway, making you unable to do anything regarding it. The PPSR check is easy test that can be done online and provides easy results without any sort of trouble. The buyer just needs to have the: Vehicle Identification Number (VIN), Chassis Number or the number it got from the car manufacturer. Whether you are a purchasing the car from a private seller or from a registered seller makes sure you do the REV check to avoid any sort to consequences.


Source : Articlesbase.com


made Thursday, December 24, 2015
Point to remember while buying a used car

Point to remember while buying a used car || Everyone, no matter how much they earn, dreams to buy a car and a house of their own. However, dream and reality are two sides of coins. The crude reality stands as a wall between the dream and the dreamer. Nonetheless there are ways by which we can fulfill our dreams. We can of course opt to buy used cars which can somehow help our dream come true. That's what most of the people think about used cars. We imagine a tampered, dented, broken, rusted car lying in some corner of a garage eagerly waiting to be mastered once again. However, this is absolutely a misconception. One would be surprised that it is hard to spot the difference between a new car and a used car except in the mileage meter. Moreover, we can avoid spending all the extra money which is usually lost in the process of buying a brand new car. Nonetheless, we have to be extra careful while buying used cars and trucks in Kitchener.

Before buying a used car we should:

Do our homework: It is important to know what we want and what the limitations of our requirement are. It is always better to prepare ourselves before we step into the dealer's floor. In order to successfully negotiate we have to be ready with all the information. The information involves comparing the prices and knowing the best price in the market and negotiating with the dealer accordingly. We should never lose our site while buying a used car. If the dealer cannot suit our need then we should start looking for other who can deliver us our requirements.

Knowing what we need: Before we go to buy used cars or truck there are few questions that we need to ask ourselves. How many people will be travelling? What are the things that we need to transports, what will we need the car or the truck most for? How much mileage will we be driving each day? Is it necessary to buy a truck or will a big car fit the situation? Depending on the answers we should approach to buy a used car or truck from the best dealer in the town.

Knowing the car properly: Before we buy the car, we should be aware of the car that we are buying. The kind of conditioning that has been done with the car. A good, glossy and polished car arranged in the front row of the used car's showroom is not the reason enough to make us buy the car. We should be careful about the car and all the details about it. Since, we are investing money on a used car we have to make sure that we do not get caught in the beautification of their language.

On the other hand there are many people who prefer a particular brand even when they are used. Therefore one of the best options is to buy a Used Audis in Toronto, if we ever desired to be a Mercedes car owner. The charm of this car is unbeatable and even though there are many new companies creeping up these days, never for once did this brand lose its worth. This car will continue to be the mark of true status probably, forever. A Mercedes, whether new or old, is always at its best. No matter how much dented or broken its real value lies in the quality of its engine. Therefore, if anyone desired to buy a pre-owned Mercedes then they can buy it from the best used car dealer so that they can get the best deal at the proper investment.


Source : Articlesbase.com


made